Sunshade full-cover type windproof, waterproof and UV-proof, tires suitable for all terrain, five-point embracing seat belt design, as well as 2-wheel mode, picnic mode, each design is very practical, while ensuring the safety of the baby, more convenient.
The cultivation bed direction decreased by about cm, which can effectively prevent the thermal conductivity effect, avoid the decline of soil temperature in winter, and do not affect the light. This kind of greenhouse has relatively high ridge height, large space, easy to work, large buffer to temperature, more heat extraction during the day, good heat preservation at night, and the temperature is not easy to drop. Greenhouse body lighting, heat storage, heat preservation and cold protection are properly handled, which is a very suitable greenhouse type for out-of-season vegetable production. The cost is not high and it is easy to popularize. Has a wind-resistant structure. Like the high-performance greenhouse, the cultivation is varied and the arrangement of stubble is flexible. It can be cultivated in late autumn plus early spring, and one crop of leafy vegetables can be added between two crops in winter. Early spring stubble seedling raising needs to be carried out in a greenhouse with heating equipment), fruit and vegetable production in late winter can also be arranged, and sunshade net can also be used for production in summer.
“the car has been driving for a long time. I always thought that the sunshade on the front of the car could only be in front. It turned out that the bayonet could be turned into a side block after the bayonet was pulled open. However, most people will put towels and invoices here. ”
Linchuan in the building to meet the design requirements of the premise, the addition of external sunshade, awning and appropriate increase in the length of the southward balcony can play a certain sunshade effect. Heat-reflecting fabric curtains coated with metal film are arranged on the inside of the window, which has a decorative effect on the front, forming a less mobile space layer about 50mm thick between the glass and the curtains. In this way, a good effect of thermal reflection and thermal insulation can be achieved, but the direct lighting is poor and should be made into a movable type. In addition, installing blinds with certain thermal reflection on the inside of the window can also obtain a certain thermal insulation effect.
However, because the bubble body is a poor conductor of heat, the cooling process often shows that the surface bubble body has been cooled and solidified, while the temperature of the core bubble body is still very high, assuming that the cooling setting ends at this time, although the bubble body has been solidified and shaped on the outside, but the core is still at a high temperature, and its heat will continue to transfer, raising the temperature on the surface of the bubble body. Coupled with the expansion force of the core bubble, it is possible to deform or split the stereotyped bubble. Therefore, for EPP manufacturers, it is necessary to ensure a sufficient cooling setting time for the cooling and curing of foamed products. In areas where higher working temperature is needed, EPP foaming material is more advantageous than PE foaming material, such as sunshade panels, insulation panels of instruments and places where the temperature between the doors is easy to rise.